TJ1 Fingertip single axis operating handle

TJ1 Fingertip single axis operating handle - Image 3

TJ1 Fingertip single axis operating handle - Image 4

Product Features

Single-axis fingertip handle for front and back operation.
Spring resets.
It is compact and easy to install.
The angle detection unit is a potentiometer or a non-contact Hall sensor.
Different output voltage ranges can be selected according to needs.

Category: [product_current_category_shortcode]

TJ1 series

Fingertip single axis operating handle

Application range

This series of products are mainly used in industrial remote controls, control panels of various engineering vehicles or industrial machinery and equipment.

Technical parameters Technical lnformation

Electrical Specification

Potentiometer type

Power supply voltage	<32Vdc
Total resistance value	4KQ or 5KQ
Resistance error	<20%
Electrical angle	± 28 °
Median dead zone angle	± 2.5 °
Potentiometer maximum power consumption	0.25W (25 ℃, no load)
Median output voltage	48% ~ 52% (± 2%)
Direction switch Power supply voltage	<35Vdc
Maximum current	2mA
Starting angle	± 3 °
Contact resistance	<500Q

Hall type

Power supply voltage	5.0 ± 0.5Vdc
Power supply current	<9mA; 18mA (dual Hall)
Limit allowable voltage	30Vdc
Reverse limit allowable voltage	-15Vdc
Load resistance	> 10KQ
Median output voltage	2.5 ± 0.2V
Output voltage linear error	<± 5%

Mechanical parameters

Shake angle about	± 30 °
Mode of operation	Automatic spring return
Starting force	1.3N
Maximum operating force	3N
Limiting force	> 50N
Service life	> 2 million times (potentiometer type)
	> 5 million times (Hall type)
Weight	45g

Environmental parameters

Working temperature	-30 ℃ ~ + 70 ℃
Storage temperature	-40 ℃ ~ + 85 ℃
Protection grade	IP66 (above the installation panel)

Product selection

TJ1 series

Output signal

[Potentiometer type] (Power supply voltage is less than 32Vdc)

P041 4KQ potentiometer, 0% ~ 100% Vdc voltage output, front and back direction switch

P052 5KQ potentiometer, 10% ~ 90% Vdc voltage output, front and back direction switch

P053 5KQ potentiometer, 25% ~ 75% Vdc voltage output, front and back direction switch

Hall type (supply voltage 5Vdc)

H51 single Hall, 0.5 ~ 2.5 ~ 4.5Vdc voltage output

H52 single Hall, 0 ~ 2.5 ~ 5.0Vdc voltage output

H53 single Hall, 1.25 ~ 2.5 ~ 3.75Vdc voltage output

2H51 redundant Hall, 0.5 ~ 2.5 ~ 4.5Vdc and 4.5 ~ 2.5 ~ 0.5Vdc voltage output

2H52 redundant Hall, 0 ~ 2.5 ~ 5Vdc and 5 ~ 2.5 ~ 0Vdc voltage output

2H53 redundant Hall, 1.25 ~ 2.5 ~ 3.75Vdc and 3.75 ~ 2.5 ~ 1.25Vdc voltage output

Electrical Installations

Wiring plug (FCI DU BOX TM 7-way male connector 76382-307)

Pin Electrical position type Hall type Redundant Hall thread color

A Potentiometer neutral center tap empty A out red

B Supply voltage Supply voltage Supply voltage Blue

C Potentiometer sliding output voltage Bout Bout black

D OV OV OV white

E Direction switch (X +) empty empty yellow

F direction switch terminal (X-) empty empty green

G direction open public close end empty empty gray

file download