LT50 Hochnütziger industrieller elektrischer Steuergriff

LT50 Heavy-duty industrial electric control handle
LT50 Heavy-duty industrial electric control handle - Image 2
LT50 Heavy-duty industrial electric control handle - Image 3
LT50 Heavy-duty industrial electric control handle - Image 4

Produktmerkmale

  • Heavy-duty industrial electric control handle, specially designed and used for construction machinery industry.
  • Long-life potentiometer angular displacement detection method.
  • Both spring return and friction positioning are considered.
  • A mechanical lock can be carried in the middle position.
  • A variety of different types of handles are available for selection. At the same time, the number and position of the buttons also have different configurations.
  • The PWM output directly drives the proportional solenoid valve. And set the starting current, maximum current and PWM frequency according to different proportion solenoid valves.
  • Optional CAN bus output
Kategorie: [product_current_category_shortcode]

LT50 series

Grip-type single-axis operating handle

Anwendungsbereich

This series of products are mainly used in cranes, loaders, forklifts, excavators, aerial work vehicles, tractors, harvesters, etc.

Technische Informationen

Potentiometer type

Stromversorgungsspannung <36VDC
Total resistance value 200Ω, 1Kω
Electrical angle ± 18 °
Median voltage 48% ~ 52% (relative power supply voltage)
Median dead zone angle ± 2.5 °
Potentiometer maximum voltage 32VDC
Potentiometer allows maximum power consumption 2W (200Ω), 0.5W (1Kω)

Elektrische Parameter

Direction switch

Load capacity 10A @ 30Vdc (resistive load)
Starting angle ± 5 °
Contact resistance <200Ω

Micro Switch

Load capacity 10A @ 30Vdc (resistive load)
Dienstleben more than 30 Millionen Mal (mechanical)
200,000 times or more (electrical)
Insulation resistance > 100MΩ(500Vdc insulation resistance meter)
Starting angle ± 3 ° ~ ± 5 °

Digital proportional amplifier drive

Stromversorgungsspannung 9 ~ 36VDC
Output drive Two PWM maximum current 3A
PWM frequency 100HZ ~ 1000HZ
Minimum current 0 ~ 0.4A
Maximum current 0.4 ~ 3A

Mechanische Parameter

Schaukelwinkel ± 20 °
Betriebsart automatic spring reset, friction positioning
Startkraft 5N
Maximale Betriebskraft 11N
Einschränkungskraft > 300N
Dienstleben > 2 Millionen Mal (potentiometer type)
> 5 Millionen Mal (Hallentyp)
Gewicht 475G (no upper end)

Umweltparameter

Arbeitstemperatur -30 ℃ ~ + 70 ℃
Lagertemperatur -40 ℃ ~ + 85 ℃
Schutznote IP65 (über dem Installationsfeld)

Product selection

LT50 series

Operation method

Friction positioning

FCF median with feel
FCL neutral mechanical lock

Spring return

SC0 back to median
SCL back to neutral position, neutral mechanical lock

Note: The mechanical lock is only applicable to the upper end of the DG handle

Ausgangssignal

P011 with 1KQ center tapped potentiometer, 0% ~ 100% Vdc voltage output
PWM224 DC24V power supply, output PWM directly drives proportional solenoid valve, maximum output current 3A

Micro switch (not available when CAN bus is output)

MS00 without micro switch
MS21 with 10A normally open micro switch
MS22 with 10A front and back position micro switch

Upper end of handle

DG upper end of DG type handle with lifting mechanical lock
HBR HBR type handle upper end with rocker on top
HDS HDS type handle upper end, with button on top
HDR top of HDR type handle with rocker on top
KGDN upper end of KG type handle, with safety switch, no rocker button
KGDR upper end of KG type handle, with safety switch, seesaw button
SS For details, please refer to the description of the upper end of the SS handle

Outgoing way

L direct output (number line)

※Special selection:

LT50-20424 and GE-20424 have the same function and are interchangeable;
LT50-22BC 1033 and MCH22BC 1033 have the same function and are interchangeable;
LT50-12BC 107 and MCH 107 have the same function and are interchangeable;
LT50-12BC 1078 and MCH12BC 1078 have the same function and are interchangeable;

Datei herunterladen

Heavy-duty industrial electric control handle

Kontaktinformationen:

WeChat: +86 15757178313

WhatsApp: +86 15757178313

E-Mail: info@luoyi-tech.com

Folgen Sie uns:

Linkedin
Anfrage

Anfrage

Bitte geben Sie das Produkt ein, das Sie konsultieren möchten ,Wir werden Sie beim ersten Mal kontaktieren.